ASSEMBLY OF PLASTER SPOTLIGHTS: HOW TO INSTALL THEM CORRECTLY


best spot lights in pakistan
The plaster spotlights are increasingly present in modern furnishings: light and bring out the details of any environment, creating an elegant and sophisticated atmosphere. Installing them is easy, especially in rooms where there are false ceilings and plasterboard walls. So let's see how to proceed with the assembly of the plaster spotlights, in a completely DIY way.
1.     How to install recessed spotlights and surface spotlights
2.     How to plaster spotlights
3.     How to clean the spotlights
How to install recessed spotlights and surface spotlights
First you need to consider where the spotlights will be mounted, calculating their position exactly. The light beam of each spotlight and the affected area must be taken into account, avoiding to install spotlights too close or far from each other (and consequently to over light or leave uncovered areas). To do this we would need to equip ourselves with a meter and a pencil to carry out the necessary measures and mark the wall where the hole will be made. Before drilling the hole it would be good to have a metal detector and make sure there are no metal parts of the plasterboard structure, to avoid damaging them. In this case, it will be sufficient to move the hole a few centimeters.
Now we are ready to drill the holes: we need to equip ourselves with a hole cutter (if the spotlight is round) or plasterboard saw (if the spotlight has square shapes) to carve a hole slightly larger than the size of the spotlight, but do not overdo it (then you will go to plaster the whole thing).
At this the point we just have to apply the frame and the respective spotlight, inserting it in the newly created compartment, slightly bending the special fins and making them rest on the structure. Before doing this we must connect everything to the electric current: if you are familiar with the electrical system, the operation is elementary, but if nothing is known about it, it is always better to consult an electrician.
The assembly of the plaster, the spotlight is now complete.

How to plaster spotlights

To fill the newly-assembled spotlights it is necessary to buy plasterboard putty or paint and touch up the grouted surface. Then mix the stucco mixing it with water and mix it until you get a homogeneous mixture. With the help of a spatula, apply a layer of stucco sufficient to cover the joint of the spotlight with the plasterboard, leveling and leveling as much as possible the irregularities. Finally, touch up with the paint once the grout is dry.

How to clean spotlights

The spotlights must be cleaned with a cloth in soft flannel or with the magical white sponge used to eliminate the marks. The ideal would be to apply starch or plaster on the flannel cloth. Absolutely forbidden to use water or damp cloths!
Visit and find the best led spotlights in Pakistan and have a great experience of lighting.

Comments

Post a Comment

Popular posts from this blog

LED DRIVEWAY LIGHTING: IDEAS AND TIPS

Image
Install in your own garden of LED lights to mark driveways and delimit spaces not only serves to facilitate the entry and passage of vehicles and people, but it is also an excellent solution to be able to embellish and make external areas usable even during the night. Correct LED lighting of the pathways is also a great deterrent to keep away the bad guys and keep the outdoor areas under control. 1.      How to light a driveway 2.      Bollards, spotlights or wall lamps? How to light a driveway To illuminate the garden correctly and to avoid dark areas, the lights must be placed along the access roads to the house, so as to mark the entire external perimeter. The position along the led light paths allows you to obtain a constant and homogeneous lighting, without affecting the costs of the bill considering the energy saving and the low consumption that characterizes this specific type of lamps. To illuminate the paths it is common t...
Read more

Entrance lighting ideas for home

Image
The entrance is probably the most important part of the house; hence the first impressions that our friends or relatives make when they enter our home, which is why it is very important to take care of both the furniture and the lights in this space. 1.      How to light up the entrance to the house 2.      Exterior entrance lighting How to light up the entrance to the house For the lighting of our entrance we must, first of all, evaluate the type of furniture present; if our entrance is mainly made up of light-colored walls and wood-colored furniture or colors, however, a little darker and classic, it will be preferable to use warm light both in led mode and in classic incandescent. Depending on the size of our entrance, we will opt for the presence of a classic chandelier, or for the installation of spotlights that maybe we could focus on jewelry on the furniture to highlight its presence. The advice is always to direct the spotlig...
Read more